3 Messages
Digest #2448
Messages
Wed Dec 23, 2015 11:15 am (PST) . Posted by:
wwood_38478
Dryer does absolutely nothing when the start button is pushed. There is app. 120vac from center to each outside terminal and 240vac across the two outside terminals on the pigtail.. There seems to be two thermal fuses and both OHM out OK. The heating element Ohms out about 10 OHMs. The push to start switch also checks OK.
Any help is much appreciated.
Thanks
Walter
United TV Service.
Any help is much appreciated.
Thanks
Walter
United TV Service.
Wed Dec 23, 2015 11:52 am (PST) . Posted by:
"RichK" gs_biker1
Hi Walter,
Sounds like you know what you're doing. If you have not yet found a schematic and wiring diagram, please take the back off and look.
It's usually on the back cover. It may also be somewhere in a plastic bag, or envelope. This will help you in tracing the problem.
Without that, I'm afraid not much more can be done.
Rich
--------------------------------------------
On Wed, 12/23/15, united_tv.service@yahoo.com [appliance-repair] <appliance-repair@yahoogroups.com> wrote:
Dryer does absolutely nothing when the start button is pushed. There is app. 120vac from center to each outside
terminal and 240vac across the two outside terminals on the pigtail.. There seems to be two thermal fuses and both OHM
out OK. The heating element Ohms out about 10 OHMs. The push to start switch also checks OK.
Any help is much appreciated.
Thanks
Walter
United TV Service.
Sounds like you know what you're doing. If you have not yet found a schematic and wiring diagram, please take the back off and look.
It's usually on the back cover. It may also be somewhere in a plastic bag, or envelope. This will help you in tracing the problem.
Without that, I'm afraid not much more can be done.
Rich
--------------------------------------------
On Wed, 12/23/15, united_tv.service@yahoo.com [appliance-repair] <appliance-repair@yahoogroups.com> wrote:
Dryer does absolutely nothing when the start button is pushed. There is app. 120vac from center to each outside
terminal and 240vac across the two outside terminals on the pigtail.. There seems to be two thermal fuses and both OHM
out OK. The heating element Ohms out about 10 OHMs. The push to start switch also checks OK.
Any help is much appreciated.
Thanks
Walter
United TV Service.
Wed Dec 23, 2015 9:20 pm (PST) . Posted by:
"John Clinard" john_clinard
If you can't find the schematic and wiring diagram, call Maytag's
customer service (800...) and they should be able to email it to you.
Thanks to everybody for all your help this year and have a very Merry
Christmas and a Happy, Healthy , and Prosperous New Year.
John
RichK gs_biker1@yahoo.com [appliance-repair] wrote:
> Hi Walter,
>
> Sounds like you know what you're doing. If you have not yet found a schematic and wiring diagram, please take the back off and look.
> It's usually on the back cover. It may also be somewhere in a plastic bag, or envelope. This will help you in tracing the problem.
> Without that, I'm afraid not much more can be done.
>
> Rich
>
> --------------------------------------------
> On Wed, 12/23/15, united_tv.service@yahoo.com [appliance-repair] <appliance-repair@yahoogroups.com> wrote:
>
>
> Dryer does absolutely nothing when the start button is pushed. There is app. 120vac from center to each outside
> terminal and 240vac across the two outside terminals on the pigtail.. There seems to be two thermal fuses and both OHM
> out OK. The heating element Ohms out about 10 OHMs. The push to start switch also checks OK.
> Any help is much appreciated.
> Thanks
> Walter
>
> United TV Service.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
> Posted by: RichK <gs_biker1@yahoo.com>
> ------------------------------------
>
> All advice on repairs to microwave ovens should only be undertaken by qualified service personnel.
> To unsubscribe please send a mail to the following address from the account you recieve this message.
> appliance-repair-unsubscribe@yahoogroups.com
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>
>
customer service (800...) and they should be able to email it to you.
Thanks to everybody for all your help this year and have a very Merry
Christmas and a Happy, Healthy , and Prosperous New Year.
John
RichK gs_biker1@yahoo.com [appliance-repair] wrote:
> Hi Walter,
>
> Sounds like you know what you're doing. If you have not yet found a schematic and wiring diagram, please take the back off and look.
> It's usually on the back cover. It may also be somewhere in a plastic bag, or envelope. This will help you in tracing the problem.
> Without that, I'm afraid not much more can be done.
>
> Rich
>
> --------------------------------------------
> On Wed, 12/23/15, united_tv.service@yahoo.com [appliance-repair] <appliance-repair@yahoogroups.com> wrote:
>
>
> Dryer does absolutely nothing when the start button is pushed. There is app. 120vac from center to each outside
> terminal and 240vac across the two outside terminals on the pigtail.. There seems to be two thermal fuses and both OHM
> out OK. The heating element Ohms out about 10 OHMs. The push to start switch also checks OK.
> Any help is much appreciated.
> Thanks
> Walter
>
> United TV Service.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
> Posted by: RichK <gs_biker1@yahoo.com>
> ------------------------------------
>
> All advice on repairs to microwave ovens should only be undertaken by qualified service personnel.
> To unsubscribe please send a mail to the following address from the account you recieve this message.
> appliance-repair-unsubscribe@yahoogroups.com
> ------------
>
> Yahoo Groups Links
>
>
>
>
>
All advice on repairs to microwave ovens should only be undertaken by qualified service personnel.
To unsubscribe please send a mail to the following address from the account you recieve this message.
appliance-repair-unsubscribe@yahoogroups.com
To unsubscribe please send a mail to the following address from the account you recieve this message.
appliance-repair-unsubscribe@yahoogroups.com
No comments:
Post a Comment